A tuner commonly displays a note name, octave number, frequency, and tuning error, such as A4 440.00 Hz +2 cents. Understanding that result starts with note names, semitones, octaves, and frequency.

1. What are the note names A, B, C, D, E, F, and G?

Western music uses seven letters for the natural note names:

A B C D E F G

After G, the sequence returns to A. These letters identify pitch classes: every A belongs to pitch class A, although As in different octaves have different frequencies.

In fixed-do solfège, the common correspondence is:

Note name C D E F G A B
Solfège Do Re Mi Fa Sol La Si

A letter alone describes a position in the repeating pitch-class cycle. An octave number identifies a specific register, as in C4, A4, and C5.

2. Why does an octave number begin on C?

In scientific pitch notation, an octave-number range normally begins on C and ends at the B immediately below the next C:

C4 D4 E4 F4 G4 A4 B4 | C5

Middle C is normally C4. The B directly below it is B3, not B4.

This is a notation convention, not an acoustic law saying that C is more fundamental than A or that music must begin on C. Letter names still run from A through G. Moving the octave-number boundary to C groups the natural C-to-B sequence and the keyboard’s repeating pattern conveniently. C major also uses only the white keys, so introductory theory often uses C as its visual starting point.

Some software shifts octave labels by one or more numbers. The same middle C may appear as C3 or C5 in a particular program, so MIDI and audio workflows should verify the frequency or MIDI note number as well as the displayed octave.

3. How far apart are adjacent note names?

Adjacent letter names are not all separated by the same distance:

Note names Semitones Distance
C → D 2 one whole tone
D → E 2 one whole tone
E → F 1 one semitone
F → G 2 one whole tone
G → A 2 one whole tone
A → B 2 one whole tone
B → next C 1 one semitone

One whole tone equals two semitones. The natural-note pattern is:

whole – whole – half – whole – whole – whole – half

4. What do sharp and flat mean?

The musical sharp symbol is ♯. It resembles the text hash character #, but they are different characters. A sharp raises the written note by one semitone:

C → C♯
F → F♯

A flat ♭ lowers the written note by one semitone:

D → D♭
B → B♭

In twelve-tone equal temperament, C♯ and D♭ normally have the same frequency and are called enharmonic equivalents. Their spelling still communicates different scale, chord, and voice-leading functions, so they are not interchangeable in every theoretical context.

5. How many semitones are in an octave?

Modern keyboards and electronic tuners usually use twelve-tone equal temperament, which divides an octave into 12 equal semitones:

C  C♯  D  D♯  E  F  F♯  G  G♯  A  A♯  B  | C

This corresponds to seven white piano keys and five black keys. Moving up one equal-tempered semitone multiplies frequency by:

2^(1/12) ≈ 1.059463

After 12 semitones, frequency has doubled and the pitch is one octave higher. A3 is 220 Hz, A4 is 440 Hz, and A5 is 880 Hz.

6. Why are E–F and B–C only one semitone apart?

There is no additional natural-note position between E and F or between B and C, so a piano has no black key between either pair. This comes from the historically established seven-note diatonic layout and its whole-step/half-step pattern; it is not a missing key in piano construction.

Twelve-tone equal temperament still permits the spellings E♯ and F♭:

  • E♯ is one semitone above E and is enharmonic with F.
  • F♭ is one semitone below F and is enharmonic with E.

These spellings have real harmonic meaning. E♯, for example, may be required when a scale or chord needs a raised form of E rather than a note functioning as F.

7. What is a cent?

A cent is a logarithmic unit for measuring musical intervals:

  • one semitone = 100 cents;
  • one whole tone = 200 cents;
  • one octave = 1200 cents.

The distance between two frequencies is:

cents = 1200 × log2(f2 / f1)

Cents measure a frequency ratio, not a raw difference in hertz. Ten cents represents the same musical distance in a low or high register even though the corresponding Hz difference changes.

A chromatic tuner finds the nearest equal-tempered pitch and reports the deviation:

  • 0 cents: exactly on the target pitch;
  • +10 cents: slightly above the target, or sharp;
  • -10 cents: slightly below the target, or flat;
  • +50 or -50 cents: near the midpoint between adjacent semitones.

A tuner’s “within ±5 cents” indication is a practical threshold, not an absolute law of music. Sustained chords and recording work may require more stability, while expressive vibrato naturally crosses a wider range.

8. What does A4=440 Hz mean?

Hertz measures cycles per second. A4=440 Hz means that A4, the A above middle C, has a fundamental frequency of 440 cycles per second.

ISO 16 defines A4=440 Hz as the standard tuning frequency commonly used as a shared reference by instruments, ensembles, and electronic tuners. It directly fixes A4; the tuning system derives the remaining pitches:

A3 = 220 Hz
A4 = 440 Hz
A5 = 880 Hz
C4 ≈ 261.63 Hz

It does not mean every A is 440 Hz, and every ensemble is not required to use 440 Hz. Some orchestras tune to 441 or 442 Hz, while historical performance may use another reference. Agreeing on one reference within an ensemble matters more than the particular number.

9. How does a tuner produce these values?

An online tuner reads microphone audio, estimates the fundamental frequency of a sustained sound, and then:

  1. finds the nearest note name and octave using A4=440 Hz and twelve-tone equal temperament;
  2. calculates the cents difference between the measured and target frequencies;
  3. indicates whether the pitch is flat, centered, or sharp.

Chords, short attacks, strong overtones, and background noise can make fundamental-frequency detection unstable. Tune in a quiet room, place the microphone near the instrument, and sustain one note. Judge the stable portion rather than the initial attack.

References